Modelo: TR35

Profundidad máx. de perforación:15m

Método de Perforación:Semihidráulico & Perforación con martillo en cabeza

>> Introducción

La Perforadora de Roca TR35 Semihidráulica con Martillo en Cabeza sobre Orugas es una perforadora actualizada, especialmente diseñada para proyectos de construcción hidroeléctrica y canteras. Permite diversas posiciones y ángulos para perforar agujeros horizontales bajos, y también puede perforar agujeros verticales e inclinados. Posee funciones mejoradas, un diseño más humanizado y un menor costo por metro de perforación. Su diseño compacto hace que la máquina ocupe menos espacio, con una operación humanizada.

Hole Diameter: 90-219 mm

Hole depth: 0-70 m

Drilling Method: Air Drilling & Mud Drilling

>> Application

AK150 crawler anchoring drilling rig, horizontal dust removal and slope protection drilling rig is a high-efficiency and multi-functional drilling rig independently developed by the company. The unique design structure is an ideal drilling rig for the construction of soil layers, sand and pebbles and weathered rock layers. The drilling rig has reliable quality and high cost performance, and is widely used in engineering construction such as drilling anchor cables and bolt holes.

Model: Tapered Drill Rod

Diameter: 19mm - 25mm

Taper Degree：4°, 6°, 7°, 11°, 12°

>> Application

Tapered drill rods are used in granite and marble quarry, gold mine, railway, tunnel, etc. for   drilling.tapered drill rods have a tough life, transferring the percussion energy from rock drill   to drilling bit and then into the rock. They're also subjected to high bending stress, not to mention

Model: Tapered Button Bits

Button size: 32，34，36，38，40mm

Taper angle:7 °/11°/12°

>> Application

The Rock Drilling Bits are made from grade hard alloy and special steel, generally matched with the light-duty rock drill, to drill the rock hole within diameter of 50mm. The drill tools are used in metallurgy mine, geological exploration, water conservancy construction, electricity, traffic, tunnel, quarry, national defence stone project etc

Model: Chisel Drill Bit

Degree: 4,6,7,11,12

Diameter:20-40mm

>> Application

Tapered equipment affords drillers the ability to change drilling bits whilst still using the same drilling rod. Drillers choose tapered cross type bits if the goal is to minimize hole deviation in small hole range drilling.

Model: Threaded Drill Bit

Bit Diamond:33 to 152 mm

Button Angle:30°,35°,40°

>> Application

The thread button drill bits are made by high quality alloy steel bar and tungsten carbides. Through heat treatment, our drilling tools are tough enough to meet rock drilling demands and have the least loss of energy while drilling the rocks. Besides, we can design customized thread button drill bits according to different drilling application, and custom drill bits are applicable to drill soft rock, loose-medium rock and hard rock.

Model: Threaded Cross Bits

Bit Diameter:33-80 mm

>> Application

The cross rock drill bit can be used under any rock drilling condition, it's hardly impacted by the model of drill rig and the rock performance. Generally, chisel bit are mainly used for hard rock, cross bit and button bit are mainly used for fissured rock.

Model: Shank adaptor

Length: 300mm-800mm

Thread:R32,R38,T38,T45,T51

>> Application

Integral Drill Steels are a fixed length with a shank at one end and a bit at the other ,and are able to drill to a depth equivalent to their effective length.The bit may consist of single chisel-shaped tungsten carbide insert or three such inserts.To drill deep holes,the rods are designed to be used in a series where the length of any rod used in longer than the one used just before it.